• Česky
  • English
  • German
  • French
  • Spanish
  • Italy
Paramotor gliders
Rescue Canopies
Adverts on gliders
Previous products
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -

Pasha 4

 Paraglider Pasha 4

Graf Pasha 4


Pasha 4 design 3d


Pasha 4 - A Paraglider Built for Two

The new Pasha 4 is a superb tandem wing for both professional and recreational tandem pilots. Thanks to the very easy take-off and great landing behaviour the glider is well suited to commercial use.  Its excellent performance combined with light and precise handling will delight cross-country pilots that want to travel with a passenger.


Safety Built to Last and Perform for Your Tandem Flights

The Pasha 4 is an elliptical canopy with 54 cells and flat aspect ratio of 5.4. The latest “Paragliding” software helped to aid design by giving a cleaner sail. This resulted in less drag over the airfoil and giving improved glide performance. The classic construction with diagonal V-tapes and a system of de-powering lines and tapes gives the canopy stability and helps maintain a clean profile. Lines are attached to every second rib and this construction allows the lines to be reduced to two tiers except at the wing tip. To improve the sink rate whilst in big ears a wide area of the surface is attached to the outermost lines and those lines are reduced to three tiers. A very simple line layout employing 3 A, B and C and 2 D main lines allows easy preparation prior to take off. The Pasha 4 has a 5 point riser including a longer trimmer system with claw buckles. Additionally, the risers are split to facilitate Big Ears. The positioning of the outermost A line makes progressive closure easy. Special attention to the small details are clearly seen on the Pasha 4. It is equipped brake handles with a swivel and magnetic clips as a standard option. Velcro closures on the wingtips make access easier to remove any sand, grass or small stones from the glider.


Big and Easy to Use

Like all Pashas the Pasha 4 inflates very easily in all conditions even in a light, nil or cross wind. The MacPara legendary easy inflation is very important for the Pasha 4 since you want to get up and away when you decide it time to go. It is a pleasant ground handling characteristics.


Launching and Flying Made Effortless

Only a few steps with lightly applied brakes and you are in the third dimension of flight. The Pasha 4 is very stable in flight with good speed even when lightly loaded. The handling is precise in turns and it’s really comfortable to enjoy flying under the Pasha 4 for long flights thanks to the special trailing edge bunching brake system. This brake system pulls together the trailing edge when applying the brakes. Just a short brake input is needed for a flat turn. The longer range of trim system on the risers offer you more safety and control of speed when you have a lighter passenger or when the wind is strong. Maximum speed can be achieved with released trimmers. The maximum speed measured with a high wing loading is 45-46 km/h. Spiral dive is easy to enter if you ever need to do it. The Pasha 4 is not spiral stable, meaning that the glider exits the spiral when the pilot releases the brakes and returns his weight-shift to a neutral position. The exit is quite simple and the pitch remains well damped. The landing is very easy and similar like on Pasha 3. The flare is nice with good control of speed. With good piloting you do not need to take a step forward when landing.


Pick Your Size

The Pasha 4 is available in sizes 39 m2 and 42 m2 in five color designs. Both sizes are EN-B certified. Pasha 4 is also LTF certified for paramotoring for loading of 200-300 kg and we call it Pasha 4 Trike.


Quality and Performance

All MacPara products use high-quality materials and are subject to constant quality controls during the manufacturing process. It is because of the ongoing consistent development that makes MacPara continue to produces high quality products.You will be proud flying MacPara products including the new Pasha 4!




Surface Top Leading Edge:Skytex 9092, Coating E85A 45 g/m2
Surface Top Trailing Edge:Skytex 9017, Coating E38A 40 g/m2
Surface Bottom:Skytex 9017, Coating E38A 40 g/m2
Main ribs:Skytex 9017, Coating E29A 40 g/m2
Diagonal ribs:Skytex 9017, Coating E29A 40 g/m2
Minor ribs: Skytex 9017, Coating E38A 40 g/m2
Upper lines:Edelrid Aramid/Kevlar
6843 – 80 kg,– 120 kg
Main lines:Edelrid Aramid/Kevlar
6843– 340 kg,– 240 kg,– 200 kg,– 160 kg


The Pasha 4 is manufactured using the paragliding industries well established lightweight material with excellent durability; Skytex 40, from Porcher Sport (NCV). Because for any glider, the part that always wears out first is the leading edge, we use Skytex 45 with evolution coating E85A for this. For the less stressed areas of the sail we use Skytex 40 with E38A coating. For the supporting and diagonal ribs we use Skytex 40 with “hard finish” coating E29A. This gives the advantage of a sail that is both lightweight and very durable.  Lines on Pasha 4 are made from the well-established Edelrid lines series A-6843 of differing diameters.


Pasha 4
Pasha 4
Zoom flat [%]96100
Area flat [m2]39.3142.65
Area projected [m2]35.4638.48
Span flat [m]14.5615.17
Aspect ratio flat5.45.4
Root cord [m]3.353.49
Weight [kg]8.69
Weight range [kg]*125-190145-220
Weight range [lbs]*276-419320-485
Min. speed [km/h]22-2422-24
Trim speed [km/h]36-3836-38
Top speed (accelerator)[km/h]42-4542-45
Glide ratio8.68.6
Min. Sink rate[m/s]1.11.1

 * pilot & passenger = weights naked + cca. 25 kg

Certificate reports

Pasha 4

Pasha 4


Pasha 4
Pasha 4
Pasha 4
Pasha 4
Pasha 4
Pasha 4
Pasha 4
Pasha 4
Pasha 4
Pasha 4