• Česky
  • English
  • German
  • French
  • Spanish
  • Italy
Paramotor gliders
Rescue Canopies
Adverts on gliders
Previous products
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -

Envy 2

 Paraglider Envy 2

Graf Envy 2



Envy 2: Legendary Cross Country Flying

The Envy 2 is a high performance, cross-country glider with very high safety and stability. The original Envy 1 set a high standard to beat within the DHV 2 category. Nevertheless, the Envy 2 continues the tradition of performance and safety for a high end cross country performer.


Shattering Expectations

Performance, agility, stability and high climbing performance were again our goals when designing this high performance glider.  The fun factor and glide efficiency originates from the design experience gained from the popular Magus series.  You will find the Envy 2 a perfect match if you are a pilot progressing from flying intermediate gliders and want to expand your skills but still want relaxed flying. The transition is easily mastered coming from an intermediate glider.  Carefully calculated airfoils of different thicknesses give the glider an excellent glide performance and stability both at trim and accelerated flight. It also features excellent stability at full speed. These are the reasons why the Envy 2 stands out as supreme amongst its competitors.


A Breed of its Own

The slim elliptical form of the canopy has an aspect ratio of 5.74. The Envy has 56 cells with full diagonals with the cells getting thinner closer to the wing tip.  The reinforcements on the ribs help to maintain clean airfoils for better efficiency and glide.    The reinforcement on the Leading edge provides an absolutely clean profile.  The line configuration uses a minimum number of lines identical to the lines used on the Envy 1. Lines are attached to every third rib and this construction allows the lines to be reduced to two tiers. The brake system let you feel the glider in flight giving you a solid sense of control. The reinforcement flap system in the centre of canopy combined with the bunching system on the wing tips give precise handling with outstanding climbing performance.


Design Highlights

The Envy 2 is brilliant on the ground. Over the years MacPara pilots have become accustomed to easy launch and landing characteristics.  The Envy 2 is no different. Everything feels very predictable in all launch conditions. In fact the Envy 2 is just as easy to handle on the ground compared to a DHV1-2 but with a higher aspect ratio to boost its performance. The Envy 2 is equipped with 20 mm risers. The split “A” risers facilitate Big Ears. Opening is smooth and predictable.


In Flight Performance with Control

The glider is stable and resistant to collapse in rough air. It features excellent stability throughout the full weight and speed range. Glide performance has increased compared to its predecessor both in trim speed and accelerated flight. In an induced collapse the glider does not rotate quickly and will usually reopen within 60 degrees.


The BEST Part: Awesome handling

The handling is precise just how you need it to be to get the most out of your cross country flying. The moderate brake pressure allows pleasant turns with good climbing performance and increases progressively toward the end of its travel to offer safety reserves.  The canopy is moderately damped in all axes and offers agility in turns. It does not overshoot much or sit back.  Great attention to small detail has paid off!


The Smaller Details

The Envy 2 is equipped with swivel brake handles and magnetic clips for easy stow away convenience. Velcro closures on the wingtips make access easier to remove any sand, grass or small stones from the glider.


MacPara Envy 2 Review

The Envy 2 is a high performance, cross-country glider with very high safety and stability. The performance profits from the experience gained in production of the Magus [competition] series.

MacPara came into existence in the early nineties and have gradually grown over the ensuing years to become one of the major brands in our sport. At the helm from the start has been manager and designer, Peter Reček. Over the last few years the company has enjoyed a large amount of competition success with their Magus range and pilots such as Petra Slivova, Tomas Brauner, Greg Blondeau, Yassen ‘big bird’ Savov and of course the Valic brothers. MacPara have also gained several world records with Nev Hulett’ current open distance record of 503 km set on a Magus, as well as previous records from the Valics and women’s record which was until a few weeks ago held by Petra.
The company are based in the north east of the Czech Republic in the town of Roznov. The town is close to flying sites on the Beskydy hills. Production is split between the facility in Roznov and Gin’s production plants in Korea.

What were your aims when you were developing the Envy 2
We enjoyed a lot of success with the original Envy and wanted to keep a similar concept: an LTF2 glider with very high stability and sporty handling. Of course we wanted to keep all the good features of its predecessor such as the easy take-off characteristics, stability and speed range.
One of our aims was to place it more in the middle of the Eden 4 and Magus XC. To improve the glide, climbing performance and speed we used the aerofoil profile from the Magus 6 in the central part of the glider. As we have done with all our gliders since 2000 the aerofoil profile varies in depth across the span. In all we made five prototypes during its development.

What group of pilots is the Envy2 aimed at?
The Envy 2 was made for cross country oriented pilots looking for relaxed flying and for pilots progressing from intermediate gliders to expand their skills.

What style of flying is the Envy 2 most suited to?
If you are gentle on the controls it has very easy behaviour but if you want to find its sporty side it offers nice dynamic handling allowing you to easily master wingovers, SATs and spirals.

Where in the weight range should the Envy 2 be flown?

As with the first Envy it can be flown anywhere in the weight range. Of course like any glider it becomes more dynamic and fun when highly loaded.

What will and existing Envy pilot notice if they try the Envy 2?
We think they will notice improved climbing performance along with a better accelerated glide. In our tests we found that when gliding at 30% bar with a faired harness it has similar performance to many competition gliders, which is of course great for flying cross country. The brakes are slightly heavier and the wing is more dynamic with a little more feedback when entering and leaving thermals.

What are you most pleased about the new glider?
That it’s been well received by the pilots who have flown it and sales are good.

What’s next from MacPara?

We’re working on a new paramotor wing, the ‘MacJet’ with full reflex.

The glider is a very clean with a classic elliptical design with an aspect ratio that isn’t too radical at 5.74. It sports a variation on MacPara’s distinctive livery that incorporates the ‘M’ logo. As with many of the company’s wings it seems to use very little in the way of trickery, you won’t find any pieces of plastic in the leading edge. Peter once told me he likes to have all the tricks hidden under the bonnet. However, one little trick that you’ll notice when you look at the leading edge is small Mylar shapers sewn into the middle of the top surface of each cell, to help improve the aerofoil shape in this area as most of the lift is generated here. The canopy is made from Porcher Skytex with 45 g/m2 cloth used on the leading edge and 40 g/m2 cloth used further back.
The line layout is simple with three main lines per riser, the a-risers are split, and only one bifurcation point. The lines are Aramid Kevlar lines from Edelrid. The brake system uses rings on the trailing edge to bunch the tips under breaking, MacPara also have what they call a ‘reinforcement flap system’ in the centre of the wing to stiffen that section of the wing.
The risers are very clean and simple with no fuss. Split A’s make pulling big ears easy. The brake handles are kept in place by metal magnetic keepers and have swivels to stop brake lines getting twisted. The speed system utilises the step down system found on some Gin and Advance gliders. This system switches the speed system from 2:1 to 3:1 and means that the initial push is light becoming harder as the system goes to 3:1, which lets you know when you’re going into the second, less efficient, part of the speed system – keep it for punching into strong headwinds or racing between closely spaced strong thermals. Everything is finished to the quality you would expect from a mainstream manufacturer.
The Envy 2 is available in five sizes covering all up weights from 65 kg up to a massive 165 kg although the largest size is only available to special order and has no certification. I chose to fly the Envy 2 28 right at the top of its weight range with my Sup’Air Vampair harness and a little lower in the range with a Sup’Air Evo XC harness. The glider was delivered with the latest backpack from MacPara, which is well constructed and comfortable, with three compression straps. As well as the required manual the glider also came with a complete repair kit, a T-shirt and even a mini multi-tool emblazoned with MacPara logos.

Envy 2 - Flap system

MacPara can certainly tick off one of their targets with this glider; it has to be one of the easiest LTF2 gliders to launch. Indeed it is no more demanding than most 1-2s. While testing the wing I took off in varied conditions from light thermic conditions to stronger breezes. In all cases it behaved impeccably, rising smoothly with a gentle tug of the risers and stopping overhead. Once there it felt very solid and easy to control. For those moving up from lower class gliders this will make the transition easy.

Once you are airborne the first thing you will notice is how solid everything feels; this wing carves through the air feeling secure and unhurried. On entering thermals there is no aggressive pitching movement, making for a very comfortable ride. The lack of pitching means you can actively accelerate the wing into thermals before using the energy that builds up in your first turn.
It is very easy to control your turns with this wing. A short pull on the brake easily puts the wing in a flat turn, with no tendency to stick at any point. If you get a bit more aggressive with the brakes and add a bit of weight shift the wing will get up on a wingtip when needed in small punchy thermals. The handling is no more demanding than most 1-2s, but this is of course an LTF2 glider so you should be experienced enough to handle it. Feedback is on the subtle end of the scale with no nervousness in the feel of the wing. It’s easy to feel where the best is lift is through the brakes. I flew the wing a lot in Brazil during the XCOpen and very quickly became so confident in the wing that I was happy to thermal with one hand on the brakes and one on the camera.
Once on glide it again feels very secure and there is no pitching so you can get on with concentrating on where to find the next climb or switch the brain off for a bit and relax. The bar is easy to use and the leading edge stays solid throughout the range. The kickdown gives good feedback of where you are in the range with the glide remaining efficient in the first section. Flying with other wings of its class this wing felt like it was on a par performance-wise.

Despite its comfort and ease of use this wing still has a fun side when you want to come back down to earth. Wingovers and asymmetric spirals are easy with the wing being forgiving of any timing errors. As with most wings these days the landing is easy with a nice flare.

The Envy2 is a great wing for pilots moving up from an LTF1-2 glider, the handling is no more demanding but you’ll get that extra dose of performance. It is a great all rounder with good cross country performance and a playful side you can discover should you wish.

Marcus King was flying the Envy 2 28 (88-110 kg) and an all up weight of 109kg with a Sup’Air Vampair harness and at 106kg with a Sup’Air Evo XC harness.

The easy handling and security

Cross country pilots moving up from an LTF1-2 or those flying in places where they don’t want to have to worry about the glider at all and just get on with flying and enjoying the experience.

Cross Coutry ( January - February 2010)




Surface Top Leading Edge:Skytex 9092, Coating E85A 45 g/m2
Surface Top Trailing Edge:Skytex 9017, Coating E38A 40 g/m2
Surface Bottom:Skytex 9017, Coating E38A 40 g/m2
Main ribs:Skytex 9017, Coating E29A 40 g/m2
Diagonal ribs:Skytex 9017, Coating E29A 40 g/m2
Minor ribs: Skytex 9017, Coating E38A 40 g/m2
Upper lines:Edelrid Aramid/Kevlar
6843 – 60 kg, – 80 kg
Main lines:Edelrid Aramid/Kevlar
7643– 230 kg,– 190 kg,– 140 kg,– 80kg


The Envy 2 is manufactured using the paragliding industries well established lightweight material with excellent durability; Skytex 40, from Porcher Sport (NCV). Because for any glider, the part that always wears out first is the leading edge, we use Skytex 45 with evolution coating E85A for this. For the less stressed areas of the sail we use Skytex 40 with E38A coating. For the supporting and diagonal ribs we use Skytex 40 with “hard finish” coating E29A. This gives the advantage of a sail that is both lightweight and very durable.


Envy 2
Envy 2
Envy 2
Envy 2
Envy 2
Zoom flat [%]91.596100105115
Area flat [m2]23.1525.7627.9530.8136.96
Area projected [m2]20.9823.3425.3327.9333.5
Span flat [m]11.5312.1612.6713.314.57
Aspect ratio flat5.745.745.745.745.74
Root cord [m]2.562.72.812.953.23
Weight [kg]5.866.256.67.7
Weight range [kg]*65-8377-9788-110105-135140-165 **
Weight range [lbs]*143-183170-214194-243231-298309-364
Min. speed [km/h]23-2523-2523-2523-2523-25
Trim speed [km/h]36-3836-3836-3836-3836-38
Top speed (accelerator)[km/h]50-5350-5350-5350-5350-53
Glide ratio8.
Min. Sink rate[m/s]

 * pilot equipped = weight naked + cca. 20 Kg

** Special size

Certificate reports
Envy2  - 23

Envy2  - 28

Envy2  - 31   





 Design Envy 2





Envy 2
Envy 2
Envy 2
Envy 2
Envy 2
Envy 2
Envy 2
Envy 2
Envy 2
Envy 2
Envy 2